|
 |
| DEV ENGINEERS |
| Manufacturer, exporters and supplier of Polypropylene
Pumps and its spares in India. |
|
 |
 |
| Polypropylene Pumps India - PP / Polypropylene
Pumps Range |
| |
| Poly Propylene PP / PVDF Centrifgual Pumps |
 |
 |
 |
 |
| DE-PP-50-55-40 |
DE-PP-100 |
DE-PP-120 |
DE-PP-130 |
| |
|
|
|
 |
 |
 |
 |
| DE-PP-160 |
DE-PP-500 |
PP Monoblock |
PVDF |
| |
|
|
|
| PP / PVDF -series Polypropylene
Pumps are specially design for highly corrosive chemicals in which metal pumps are not recommended or in its cost is higher. The PP- series pumps design are single piece molded polypropylene volute casing with semi-open impeller and casing cover to ensure a smooth running performance against corrosion. The high allumina ceramic sleeve protects shaft to any corrosion and abrasion. The GFT or Sic Vs. Ceramic PTFE below Mechanical seal prevents the leakage from the pumps. The Cast Iron heavy duty oil lubricated bearing housing provide maximum strength to pump. The pumps are also available in Mon-block version with compact design. The PVDF series pump thick walled casing liner & back plate is made of PVDF. A large metal insert in PVDF impeller increased mechanical strength.
The PP Series Polypropylene Pumps are also available in
monoblock version with compact design.
|
| Polypropylene Pumps
APPLICATION : For handling highly corrosive acids, alkalis, hydrocarbons, effluent, slurries, and other chemicals like; HCL �33%, Dilute H2so4, Caustic solutions ( NaOH ), HF, H3PO4, HN03, Alum, NaoCl, Feso4, CusO4, FeCl3 etc. The pumps are also used in scrubbing of corrosive gases like Cl2, Br2, F2, I2, So2, So3, Co2 etc. as scrubber pump in various chemical industries, in Pickling process in Steel Rolling Mills, Acid circulation in electro plating industries, decaling in boilers, heat exchangers etc. |
| Polypropylene Pumps are available
up to 100 m3/hr Capacity, Up to 45 meters Head, Temperature
range up to 70* C for PP MOC and 150* C for PVDF MOC And Speed
up to 1440 RPM & 2900 RPM. |
 |
| Seal Less Magnetic Drive Polypropylne PVDF Pumps |
 |
 |
 |
| PMD-30 |
PMD-50 |
With Flame Proof Motor |
| |
| All PMD -series Seal Less Magnet Driven
Polyprpylene Centrifugal Polypropylene Pumps utilize an innovative dual magnet concept to drive the impeller. The radial gap coupling is composed of outer and inner permanent ceramic magnets, with the outer drive magnet affixed to the motor shaft and the inner driven magnet affixed to the pump impeller. The torque created by the two concentrate magnets is transmitted through a static seal comprising a non-magnetic corrosion resistant magnet housing. Casing, Casing Cover and Impeller are made from Glass field Polypropylene or PVDF. |
| Seal Less Magnetic Drive Polypropylne PVDF Pumps
Applications: Ideal for transfer highly corrosive chemicals, acids, dyes, solvents, toxic & fuming liquids, DM water, Mineral Water etc. in Chemical, Pharmaceuticals, Textiles, Food, Electroplating Industries. Also used in Laboratory & Medial Equipments, X-Ray Film Plants, Photo Processing, PCB manufacturers, Liquid dispensing machine and fountains etc. |
| Seal Less Magnetic Drive Polypropylne PVDF
Pumps are available up to 300 LPM Capacity, Up to 20 meters
Head, Temperature range up to 80* C for PP MOC and 120* C for
PVDF MOC And with Single Phase & Three Phase Electric
motors. |
| Polyprpylene Vertical Gland Less Pump |
 |
 |
|
|
| |
|
|
|
| PP-V- series Polyprpylene
Vertical Glandless Pumps are specially design to remove the
problems arising from the use of Mechanical Seals, Stuffing
Box Gland , Internal Bearings and Dry running in all types
Centrifugal Process Pumps. The pumps is similar design to any
conventional centrifugal pump. It differs in so far as , it is
always mounted in the vertical position. A restriction is
provided above the impeller and the need for any form of
liquid seal is obviated by allowing a small leakage to escape
by way of an overflow connection in the upper pump body and
return to the suction vessel. The Volute Casing & Impeller
are made from UHMWPE and also the over flow Casing Cover is
made from UHMWPE materials to give max. high strength to pump.
The Pump is supported by CI mounted bracket with SS Bolts
& Nuts.
Polyprpylene Vertical Gland Less Pump Applications:
For handling highly corrosive & abrasive acids, alkalis
like H3PO4, H2SO4, HF, ZnSO4, Na2SO4, HCL, NaoH, etc. in
Phosphoric Acid plants, Gas Washing Plants, Rayon Plants,
Caustic Soda Plants, Effluent Treatment Plants etc.
|
| Polypropylene Pumps
are available up to 100 m3/hr Capacity, Up to 45 meters Head,
Temperature range up to 120* C And Speed up to 1440 RPM &
2900 RPM. |
For details pls. contact
DEV ENGINEERS
Shed No.A/47, Maruti Industrial Estate, Vijay Mill Compound,
Opp. Naroda Fire Station,
Naroda Road, Ahmedabad-382345, Gujarat , India
Phone : +91-8866095676, 7405283919 | Cell No. : +91-9824012742, 7874004781
Email : info@devpumps.com |
salesdevpumps@gmail.com
|
|
| : : : Visit Our Full Range of Products At : : : |
| www.devpumps.com |
| |
|
Copyright " www.devpumps.com - Dev Engineers - Gujarat India - All Rights Reserved.
|
|
|